In-Line Magnetic Separators Cross Belt Magnetic Separators.
The In-line magnetic separator is very similar to the cross belt in that is also has a continually running belt across the magnet’s surface. The difference being this separator runs parallel with the conveyed material discharging tramp meal at the end of the conveyor. Typical reasons for using this form of separator is fast running conveyors deep burden depths and location practicality.
Magnetic Separator – Magnetics Corporation of India
Permanent Magnetic Separator MCI has supplied one of the biggest ILMS in India which is installed at Tata Mundra site. The 1800 mm and 2000 mm belt width magnet is capable of lifting bolts and nuts from 550 mm operating height and throw out 50 kg tramp iron particle. This is demonstrated in the video presentation below:
Belt Magnetic Separator | Conveyor Belt Magnet
The Cross Belt Separator is a suspended magnet with a continuously running belt that strips off captured tramp metal and discharges off the side or end of the conveyor. The permanent magnetic forces provide continuous and effective removal of unwanted tramp metal. Permanent magnet will retain tramp metal even during power outages and fluctuations.
Cross Belt Separators - SDM Magnetics Co. Ltd.
Cross belt separators are widely used to iron removal and purification in waste recovery grain wood chemistry construction mineral thermal power and light industry. Compact structure easy to maintain low noise and cost. Special sealed bearing and automatic correction belt will help cross belt separators to work very long hours under.
Overband magnetic separators | Goudsmit Magnetics
An overband magnet effectively and quickly separates high volumes of iron or steel and hangs above a flat or trough-shaped conveyor belt - in line or cross belt magnet. An overband magnetic separator is self-cleaning and continuously draws ferro parts from a material flow. The iron removal efficiency of overband magnets ranges from 70 to 90%.
Magnetic metal separators - Magnetix
The over-belt magnetic separator type STM is intended for r emoval of tramp iron from bulk materials transported on conveyor belts or vibratory feeders.
Magnetics Corporation of India – Magnetics Corporation of.
Magnetics Corporation of India (MCI) established in 1982 accredited with ISO 9001: 2008 was founded by Mr E. I. Bhat currently the CEO of Magnetics Corporation of India (MCI). He founded MCI with a vision for quality and excellence.
Magnetic Separators - Thomasnet
ISO 9001 2008 Worldwide custom manufacturer of magnetic separator conveyors for oil reclaiming from metal chips. Magnetic separator types include drag conveyors for cast iron ferrous materials magnetic roller separator conveyor for handling small ferrous chips to approximately 2 in. lengths spiked belt separator for handling mixed bushy chips.